Why This Matters
The afternoon sun angle in Southern California between June and September is low enough to drive direct solar radiation deep into west-facing rooms. Standard window treatments block the view; film blocks the heat.
Near Energy Time Solar in Los Angeles, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
Southern California's Santa Ana wind conditions create periods of exceptionally clear, dry air that amplify solar intensity. During these events, unfilmed windows can drive interior temperatures 15–20°F above set point.
The Solution
Residential window film is the most targeted solution for solar heat gain: it addresses the problem at the source — the glass — rather than compensating with more cooling.
Low-e retrofit film is specifically designed for older single-pane windows. It adds a low-emissivity layer that dramatically improves thermal performance — the most cost-effective upgrade for pre-1980 California homes.
Non-metallic ceramic particles reject heat without interfering with signals or views.
Climate & Solar Performance
Properties near Energy Time Solar in Angelino Heights, Los Angeles experience low-e glass performance conditions that make window film particularly effective. Ceramic Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for historic or older home protection
Professional installers available in Los Angeles
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days