Why This Matters
Low-e coatings are applied to the inner surface of the outer pane in double-pane windows. This placement maximizes their thermal efficiency — and also maximizes their reflective focus on anything in the sun's path.
Near Catherine Ursich Park in Tacoma, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
Periods of exceptionally clear, dry air in this region amplify solar intensity. During these events, window reflection can be 20–30% more intense than on a typical sunny day.
The Solution
Window film works by either absorbing the solar energy (ceramic and solar control films) or scattering it (anti-reflective and perforated films) so it can't concentrate into a hot spot.
Solar control film addresses both reflection and heat transmission. It's the right choice when you want to stop turf burn AND reduce interior heat gain. Slightly more visible from outside than anti-reflective film.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Catherine Ursich Park in Joint Base Lewis-McChord, Tacoma experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for historic or older home protection
Professional installers available in Tacoma
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days