Why This Matters
Modern energy-efficient windows use a low-emissivity (low-e) coating that reflects solar energy. When the glass is slightly concave — common in double-pane units — it focuses that reflected energy into a concentrated hot spot.
Near PCM Construction in Orem, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for single-family home installations, which the most common residential application; window film reduces heat gain and protects furnishings.
This climate — 260+ sunny days per year in most areas — means the reflection problem isn't seasonal. It's year-round, with peak intensity in summer and a secondary spike in winter when the sun angle is low.
The Solution
Low-e retrofit films are the most targeted solution for the most common cause. They add a secondary low-emissivity layer to existing glass that changes the reflection angle and reduces the reflective intensity below the damage threshold.
Ceramic film is the premium option: non-metallic, signal-transparent, and highly effective at blocking solar energy. It costs 20–40% more than standard films but offers superior clarity and a longer lifespan.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near PCM Construction in Northridge, Orem experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for single-family home protection
Professional installers available in Orem
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days