Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near PCM Construction in Orem, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for home office installations, which glare control and uv protection are critical for home offices with screen-facing windows.
The marine layer that covers coastal California in the morning burns off by midday, leaving afternoons with intense, direct sunlight. West-facing rooms without film are at their hottest between 2pm and 5pm.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Non-metallic ceramic particles reject heat without interfering with signals or views.
Climate & Solar Performance
Properties near PCM Construction in Northridge, Orem experience afternoon heat gain conditions that make window film particularly effective. Ceramic Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for home office protection
Professional installers available in Orem
10–15 year manufacturer warranty
Installation Guide
Installation cost varies by window size, film grade, and local labor rates. Expect $8–$15 per square foot installed for quality solar control or ceramic films. A typical residential window runs $150–$400.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days