Why This Matters
Modern energy-efficient windows use a low-emissivity (low-e) coating that reflects solar energy. When the glass is slightly concave — common in double-pane units — it focuses that reflected energy into a concentrated hot spot.
Near Temple Square in Sandy, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for home office installations, which glare control and uv protection are critical for home offices with screen-facing windows.
The marine layer that covers coastal areas in the morning burns off by midday, leaving afternoons with intense, direct sunlight. This pattern creates a predictable daily window for reflection damage — typically 1pm to 5pm.
The Solution
Low-e retrofit films are the most targeted solution for the most common cause. They add a secondary low-emissivity layer to existing glass that changes the reflection angle and reduces the reflective intensity below the damage threshold.
Low-e retrofit film is specifically designed to address the low-e glass reflection problem. It modifies the reflective properties of existing glass without replacement — the most cost-effective solution for new construction.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Temple Square in Sandy Amphitheater, Sandy experience afternoon heat gain conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for home office protection
Professional installers available in Sandy
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days