Why This Matters
Low-e coatings are applied to the inner surface of the outer pane in double-pane windows. This placement maximizes their thermal efficiency — and also maximizes their reflective focus on anything in the sun's path.
Near Midwest Construction & Development in Pierre, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
Periods of exceptionally clear, dry air in this region amplify solar intensity. During these events, window reflection can be 20–30% more intense than on a typical sunny day.
The Solution
Window film works by either absorbing the solar energy (ceramic and solar control films) or scattering it (anti-reflective and perforated films) so it can't concentrate into a hot spot.
Perforated film is the most aggressive diffusion solution. The micro-hole pattern physically prevents any focused beam from forming. Best for large picture windows with severe reflection problems.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Midwest Construction & Development in South Dakota Discovery Center, Pierre experience low-e glass performance conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for multi-family residence protection
Professional installers available in Pierre
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days