Why This Matters
Heat gain through glass is cumulative. A room that gains 5°F per hour through unfilmed windows will be 15–20°F above set point by mid-afternoon — forcing the HVAC system to work significantly harder.
Near Pierson Lisa a DVM in Long Beach, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
The California climate — 260+ sunny days per year in most regions — means solar heat gain is a persistent challenge. Window film addresses it at the source, without blocking your view.
The Solution
Ceramic film is the premium choice for homes where view clarity and signal transparency are priorities. Non-metallic particles absorb heat without the mirror effect of metallic films.
Ceramic film is the premium option: non-metallic, signal-transparent, and highly effective at blocking solar energy. It costs 20–40% more than standard films but offers superior clarity and a longer lifespan.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Pierson Lisa a DVM in Lisa Wall Training Stables, Long Beach experience afternoon heat gain conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for historic or older home protection
Professional installers available in Long Beach
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days