Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Congregation Am Tikvah in San Francisco, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for single-family home installations, which the most common residential application; window film reduces heat gain and protects furnishings.
Southern California's Santa Ana wind conditions create periods of exceptionally clear, dry air that amplify solar intensity. During these events, unfilmed windows can drive interior temperatures 15–20°F above set point.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Congregation Am Tikvah in Mission District, San Francisco experience afternoon heat gain conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for single-family home protection
Professional installers available in San Francisco
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days