Why This Matters
Low-e coatings on double-pane windows are optimized for winter heat retention. In summer, they still allow significant solar heat gain. Window film corrects this seasonal imbalance.
Near Ashby Lumber in Berkeley, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
The California climate — 260+ sunny days per year in most regions — means solar heat gain is a persistent challenge. Window film addresses it at the source, without blocking your view.
The Solution
Low-e retrofit film is the most cost-effective upgrade for older single-pane windows. It adds a low-emissivity layer that dramatically improves thermal performance without full window replacement.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Ashby Lumber in Ashby Village, Berkeley experience low-e glass performance conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for multi-family residence protection
Professional installers available in Berkeley
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days