Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near SunSolar U.S. in Irvine, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
The California climate — 260+ sunny days per year in most regions — means solar heat gain is a persistent challenge. Window film addresses it at the source, without blocking your view.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Non-metallic ceramic particles reject heat without interfering with signals or views.
Climate & Solar Performance
Properties near SunSolar U.S. in U.S. Arts & Design Irvine, Irvine experience low-e glass performance conditions that make window film particularly effective. Ceramic Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for historic or older home protection
Professional installers available in Irvine
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days