Why This Matters
Heat gain through glass is cumulative. A room that gains 5°F per hour through unfilmed windows will be 15–20°F above set point by mid-afternoon — forcing the HVAC system to work significantly harder.
Near HCI Solar in Berkeley, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for luxury residence installations, which high-end homes require premium ceramic or spectrally selective films that preserve view clarity.
The California climate — 260+ sunny days per year in most regions — means solar heat gain is a persistent challenge. Window film addresses it at the source, without blocking your view.
The Solution
Ceramic film is the premium choice for homes where view clarity and signal transparency are priorities. Non-metallic particles absorb heat without the mirror effect of metallic films.
Low-e retrofit film is specifically designed for older single-pane windows. It adds a low-emissivity layer that dramatically improves thermal performance — the most cost-effective upgrade for pre-1980 California homes.
Non-metallic ceramic particles reject heat without interfering with signals or views.
Climate & Solar Performance
Properties near HCI Solar in Solar Car Wash, Berkeley experience afternoon heat gain conditions that make window film particularly effective. Ceramic Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for luxury residence protection
Professional installers available in Berkeley
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days