Why This Matters
Heat gain through glass is cumulative. A room that gains 5°F per hour through unfilmed windows will be 15–20°F above set point by mid-afternoon — forcing the HVAC system to work significantly harder.
Near Universal Technical Institute in Ontario, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
California's drought-resistant landscaping trend has reduced shade tree coverage in many neighborhoods. Homes that previously relied on mature trees for solar shading are now prime candidates for window film.
The Solution
Ceramic film is the premium choice for homes where view clarity and signal transparency are priorities. Non-metallic particles absorb heat without the mirror effect of metallic films.
Low-e retrofit film is specifically designed for older single-pane windows. It adds a low-emissivity layer that dramatically improves thermal performance — the most cost-effective upgrade for pre-1980 California homes.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Universal Technical Institute in Ontario International Airport, Ontario experience low-e glass performance conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for historic or older home protection
Professional installers available in Ontario
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days