Why This Matters
Heat gain through glass is cumulative. A room that gains 5°F per hour through unfilmed windows will be 15–20°F above set point by mid-afternoon — forcing the HVAC system to work significantly harder.
Near Joann Dominguez, M.D., PharmD in Berkeley, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
Inland California cities experience some of the highest solar irradiance in the country. Combined with older single-pane window stock, this creates strong demand for low-e retrofit and solar control films.
The Solution
Ceramic film is the premium choice for homes where view clarity and signal transparency are priorities. Non-metallic particles absorb heat without the mirror effect of metallic films.
Anti-reflective film is the most targeted solution for glare: it reduces peak window luminance without significantly cutting total light transmission. Best for rooms where screen visibility is the primary concern.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Joann Dominguez, M.D., PharmD in West Berkeley, Berkeley experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for historic or older home protection
Professional installers available in Berkeley
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days