Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Ashby Lumber in Oakland, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for home office installations, which glare control and uv protection are critical for home offices with screen-facing windows.
Southern California's Santa Ana wind conditions create periods of exceptionally clear, dry air that amplify solar intensity. During these events, unfilmed windows can drive interior temperatures 15–20°F above set point.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Solar control film addresses both heat gain and glare. It's the right choice when you want to reduce cooling costs AND improve comfort. Slightly more visible from outside than anti-reflective film.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Ashby Lumber in West Oakland, Oakland experience afternoon heat gain conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for home office protection
Professional installers available in Oakland
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days