Why This Matters
Heat gain through glass is cumulative. A room that gains 5°F per hour through unfilmed windows will be 15–20°F above set point by mid-afternoon — forcing the HVAC system to work significantly harder.
Near San Francisco State University Downtown Campus in Berkeley, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for single-family home installations, which the most common residential application; window film reduces heat gain and protects furnishings.
The marine layer that covers coastal California in the morning burns off by midday, leaving afternoons with intense, direct sunlight. West-facing rooms without film are at their hottest between 2pm and 5pm.
The Solution
Ceramic film is the premium choice for homes where view clarity and signal transparency are priorities. Non-metallic particles absorb heat without the mirror effect of metallic films.
Low-e retrofit film is specifically designed for older single-pane windows. It adds a low-emissivity layer that dramatically improves thermal performance — the most cost-effective upgrade for pre-1980 California homes.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near San Francisco State University Downtown Campus in Downtown Berkeley, Berkeley experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for single-family home protection
Professional installers available in Berkeley
10–15 year manufacturer warranty
Installation Guide
Installation cost varies by window size, film grade, and local labor rates. Expect $8–$15 per square foot installed for quality solar control or ceramic films. A typical residential window runs $150–$400.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days