Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Franklin Square in Oakland, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for single-family home installations, which the most common residential application; window film reduces heat gain and protects furnishings.
The California climate — 260+ sunny days per year in most regions — means solar heat gain is a persistent challenge. Window film addresses it at the source, without blocking your view.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Hybrid films combine ceramic particles with metallic layers for maximum heat rejection. They're the right choice for extreme solar exposures or homes with very large west-facing glass areas.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Franklin Square in Frank G. Mar Community Housing, Oakland experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for single-family home protection
Professional installers available in Oakland
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days