Why This Matters
Low-e glass was a major step forward in window efficiency. But it has limits. Low-e retrofit film extends that performance further, adding a second emissivity layer that existing glass lacks.
Near University Health Services, Tang Center in Oakland, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
Inland California cities experience some of the highest solar irradiance in the country. Combined with older single-pane window stock, this creates strong demand for low-e retrofit and solar control films.
The Solution
Most residential window film installations are completed in a single day. The film cures fully within 30 days, after which performance is at its rated specification.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near University Health Services, Tang Center in Oak Center, Oakland experience low-e glass performance conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for multi-family residence protection
Professional installers available in Oakland
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days