Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Carlisle Roofing in Lancaster, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
Southern California's Santa Ana wind conditions create periods of exceptionally clear, dry air that amplify solar intensity. During these events, unfilmed windows can drive interior temperatures 15–20°F above set point.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Carlisle Roofing in Lancaster School District, Lancaster experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for multi-family residence protection
Professional installers available in Lancaster
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days