Why This Matters
Solar heat gain through windows accounts for 25–30% of residential cooling load in California homes. That's the single largest controllable source of summer heat gain.
Near American Array Solar and Roofing in Fremont, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
Southern California's Santa Ana wind conditions create periods of exceptionally clear, dry air that amplify solar intensity. During these events, unfilmed windows can drive interior temperatures 15–20°F above set point.
The Solution
Film selection for south- and west-facing windows should prioritize solar heat rejection. For north-facing windows, UV protection and glare control are typically the primary goals.
Low-e retrofit film is specifically designed for older single-pane windows. It adds a low-emissivity layer that dramatically improves thermal performance — the most cost-effective upgrade for pre-1980 California homes.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near American Array Solar and Roofing in North America Logistics Worldwide, Fremont experience south & west exposure conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for multi-family residence protection
Professional installers available in Fremont
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days