Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Muhammad Mosque in Oakland, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for single-family home installations, which the most common residential application; window film reduces heat gain and protects furnishings.
The California climate — 260+ sunny days per year in most regions — means solar heat gain is a persistent challenge. Window film addresses it at the source, without blocking your view.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Micro-perforated pattern provides one-way privacy and solar control without blocking the view.
Climate & Solar Performance
Properties near Muhammad Mosque in West Oakland, Oakland experience afternoon heat gain conditions that make window film particularly effective. Perforated Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for single-family home protection
Professional installers available in Oakland
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days