Why This Matters
Solar heat gain through windows accounts for 25–30% of residential cooling load in California homes. That's the single largest controllable source of summer heat gain.
Near Ashby Lumber in Berkeley, south- and west-facing windows receive the most direct solar load and benefit most from film. This is especially problematic for historic or older home installations, which older single-pane windows benefit most from low-e retrofit film to improve thermal efficiency.
The marine layer that covers coastal California in the morning burns off by midday, leaving afternoons with intense, direct sunlight. West-facing rooms without film are at their hottest between 2pm and 5pm.
The Solution
Film selection for south- and west-facing windows should prioritize solar heat rejection. For north-facing windows, UV protection and glare control are typically the primary goals.
Anti-reflective film is the most targeted solution for glare: it reduces peak window luminance without significantly cutting total light transmission. Best for rooms where screen visibility is the primary concern.
Retrofits existing glass with a low-emissivity coating for improved thermal performance.
Climate & Solar Performance
Properties near Ashby Lumber in Ashby Village, Berkeley experience south & west exposure conditions that make window film particularly effective. Low-E Retrofit Window Film is specifically engineered to address this solar exposure.
Effective against south & west exposure
Rated for historic or older home protection
Professional installers available in Berkeley
10–15 year manufacturer warranty
Installation Guide
The best time to schedule installation is in the morning, before the glass heats up. Hot glass causes the slip solution to evaporate too quickly, making it harder to position the film correctly.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days