Why This Matters
Single-pane windows — still common in California homes built before 1980 — have almost no thermal resistance. Low-e retrofit film can cut their solar heat gain by 40–60% at a fraction of the cost of replacement.
Near Rush Park in Long Beach, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
The marine layer that covers coastal California in the morning burns off by midday, leaving afternoons with intense, direct sunlight. West-facing rooms without film are at their hottest between 2pm and 5pm.
The Solution
The installation process is non-invasive: clean the glass, apply the film with a slip solution, squeegee out air pockets, and trim to fit. No construction, no permits, no disruption.
Perforated film solves the privacy-versus-light tradeoff for street-facing rooms. The micro-hole pattern maintains outward visibility from inside while blocking the view from outside during daylight hours.
Non-metallic ceramic particles reject heat without interfering with signals or views.
Climate & Solar Performance
Properties near Rush Park in Bixby Park, Long Beach experience afternoon heat gain conditions that make window film particularly effective. Ceramic Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for multi-family residence protection
Professional installers available in Long Beach
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days