Why This Matters
Double-pane windows with low-e coatings perform well in cold climates where retaining heat is the goal. In California's mild winters and hot summers, the priority is solar rejection — which is where window film adds the most value.
Near Simply Solar in Berkeley, west-facing windows at low afternoon sun angles drive the highest interior temperature increases. This is especially problematic for luxury residence installations, which high-end homes require premium ceramic or spectrally selective films that preserve view clarity.
The marine layer that covers coastal California in the morning burns off by midday, leaving afternoons with intense, direct sunlight. West-facing rooms without film are at their hottest between 2pm and 5pm.
The Solution
After installation, the film is essentially invisible from inside the home. The exterior may show a slight tint, but view quality and light transmission remain largely unchanged.
Solar control film addresses both heat gain and glare. It's the right choice when you want to reduce cooling costs AND improve comfort. Slightly more visible from outside than anti-reflective film.
Non-metallic ceramic particles reject heat without interfering with signals or views.
Climate & Solar Performance
Properties near Simply Solar in Solar Car Wash, Berkeley experience afternoon heat gain conditions that make window film particularly effective. Ceramic Window Film is specifically engineered to address this solar exposure.
Effective against afternoon heat gain
Rated for luxury residence protection
Professional installers available in Berkeley
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days