Why This Matters
Low-e glass reflects up to 70% of solar energy. When that reflected beam hits artificial turf at the right angle — typically in the afternoon when the sun is lower — surface temperatures can exceed 200°F within minutes.
Near Kohl's in Elsmere, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for multi-family residence installations, which condos and apartment buildings benefit from film to reduce hvac load and improve tenant comfort.
Periods of exceptionally clear, dry air in this region amplify solar intensity. During these events, window reflection can be 20–30% more intense than on a typical sunny day.
The Solution
DIY film application is possible for smaller windows, but professional installation is strongly recommended for large picture windows or any window where the reflection path is severe. Improper application leaves bubbles and gaps that reduce effectiveness.
Solar control film addresses both reflection and heat transmission. It's the right choice when you want to stop turf burn AND reduce interior heat gain. Slightly more visible from outside than anti-reflective film.
Blocks high-heat solar wavelengths to reduce interior temperatures and UV exposure.
Climate & Solar Performance
Properties near Kohl's in Arbour Park, Elsmere experience low-e glass performance conditions that make window film particularly effective. Solar Control Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for multi-family residence protection
Professional installers available in Elsmere
10–15 year manufacturer warranty
Installation Guide
Film curing takes 30 days after installation. During this period, you may notice small water bubbles or a hazy appearance — this is normal and will resolve completely as the adhesive cures.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days