Why This Matters
Modern energy-efficient windows use a low-emissivity (low-e) coating that reflects solar energy. When the glass is slightly concave — common in double-pane units — it focuses that reflected energy into a concentrated hot spot.
Near Delaware State University in Dover, energy-efficient double-pane glass with low-e coatings can be enhanced further with retrofit film. This is especially problematic for single-family home installations, which the most common residential application; window film reduces heat gain and protects furnishings.
Periods of exceptionally clear, dry air in this region amplify solar intensity. During these events, window reflection can be 20–30% more intense than on a typical sunny day.
The Solution
Low-e retrofit films are the most targeted solution for the most common cause. They add a secondary low-emissivity layer to existing glass that changes the reflection angle and reduces the reflective intensity below the damage threshold.
Low-e retrofit film is specifically designed to address the low-e glass reflection problem. It modifies the reflective properties of existing glass without replacement — the most cost-effective solution for new construction.
Retrofits existing glass with a low-emissivity coating for improved thermal performance.
Climate & Solar Performance
Properties near Delaware State University in Dover, Dover experience low-e glass performance conditions that make window film particularly effective. Low-E Retrofit Window Film is specifically engineered to address this solar exposure.
Effective against low-e glass performance
Rated for single-family home protection
Professional installers available in Dover
10–15 year manufacturer warranty
Installation Guide
Professional installation typically takes 2–4 hours for a standard residential job. The installer will clean the glass, apply the film with a slip solution, squeegee out all air pockets, and trim to a precise fit.
Install time
30–45 min
Per window
$150–$400
Cure time
30 days